Our Most Requested Appliance Repairs in Vaughan This Year

Top Appliance Repair Requests in Vaughan for 2025

Based on our service calls this year, here are the most frequent appliance problems Vaughan homeowners are facing, along with tips to troubleshoot them and when to call in the pros.

1. Refrigerator Not Cooling Properly

The Problem: A fridge that’s not cooling is one of the most urgent repair requests we get in Vaughan. Whether it’s a Samsung side-by-side or a Whirlpool French door model, warm food and spoiled groceries are a homeowner’s nightmare. Common culprits include faulty evaporator fans, clogged condenser coils, or error codes like Samsung’s 88 88 display.

Troubleshooting Tips:

• Check the temperature settings: Ensure the fridge is set to 37°F (3°C) and the freezer to 0°F (-18°C).
• Clean the condenser coils: Dust and debris can block airflow. Use a vacuum or coil brush to clean the coils (usually behind or under the fridge).
• Inspect the door seals: Worn gaskets let warm air in. Test by closing the door on a piece of paper—if it slides out easily, the seal needs replacing.
• Look for error codes: For example, LG’s Er FF code points to a freezer fan issue, while Samsung’s PC ER indicates a communication error.

When to Call ARNI: If cleaning or resetting doesn’t fix the issue, you may have a deeper problem like a failed compressor or thermistor. Our Vaughan technicians can diagnose and replace parts like the Samsung DA32-00006W thermistor or Whirlpool W10316760 sensor, saving your fridge and your groceries.

2. Dishwasher Not Cleaning Dishes

The Problem: Dirty dishes after a cycle are a common complaint, especially with Bosch dishwashers, a favorite in Vaughan homes. Issues like clogged spray arms, faulty pumps, or error codes (e.g., Bosch E15 for water leakage) are often to blame.

Troubleshooting Tips:

• Clear the spray arms: Food debris can clog the tiny holes. Remove the arms and rinse them under warm water.
• Check the filter: Most dishwashers have a filter at the bottom. Clean it monthly to prevent buildup.
• Use the right detergent: Cheap or incorrect detergents can leave residue. Stick to high-quality pods or powders.
• Inspect for error codes: Bosch’s E24 code signals a drain issue, often fixed by clearing the drain hose.

When to Call ARNI: Persistent poor cleaning or error codes like E15 or E24 may indicate a broken circulation pump or control board. Our Vaughan team carries parts like the Bosch 00611323 pump to get your dishwasher back to sparkling results.

3. Washer Leaking or Not Draining

The Problem: Leaky or slow-draining washing machines, especially front-load models like LG or Maytag, are a frequent repair request in Vaughan. Error codes like LG’s OE (drain error) or visible water under the machine are telltale signs.

Troubleshooting Tips:

• Check the drain hose: Kinks or clogs can prevent proper drainage. Straighten the hose and clear any blockages.
• Clean the drain pump filter: Most front-load washers have a small door at the bottom front. Open it and remove lint or debris.
• Inspect door seals: Cracked or moldy seals can leak. Clean them with vinegar or replace if damaged.
• Note error codes: Maytag’s F9 E1 code indicates a drainage issue, often fixable by clearing the pump.

When to Call ARNI: If the washer still leaks or won’t drain, you might need a new drain pump (e.g., LG 4681EA2001T) or a professional diagnosis. Our Vaughan technicians can fix it fast, preventing water damage to your home.

4. Oven Not Heating Evenly

The Problem: Uneven baking or an oven that won’t heat at all is a common issue with brands like KitchenAid and GE. Faulty igniters, bake elements, or error codes like F1 (control board failure) are often the cause.

Troubleshooting Tips:

• Test the temperature: Use an oven thermometer to check if the temperature matches the setting.
• Inspect the bake element: A glowing red element is normal; if it’s dark or damaged, it needs replacing.
• Reset the oven: Unplug it for 10 minutes to clear minor glitches.
• Check for error codes: GE’s F2 code signals an overheating issue, which may require sensor replacement.

When to Call ARNI: A broken igniter (e.g., KitchenAid WB2X9998) or faulty control board requires professional tools and expertise. Our Vaughan team can restore your oven’s performance, ensuring perfectly baked meals.

5. Dryer Not Drying Clothes

The Problem: A dryer that runs but doesn’t dry is a headache for Vaughan families. Common causes include clogged vents, broken heating elements, or Whirlpool’s AF code (restricted airflow).Troubleshooting Tips:

• Clean the lint filter: Do this after every load to maintain airflow.
• Check the vent hose: A clogged or crushed hose can trap heat. Disconnect and clear it with a vent brush.
• Inspect the exhaust duct: Ensure the outdoor vent flap opens freely.
• Look for error codes: Samsung’s HC code indicates a heating issue, often tied to a failed element.

When to Call ARNI: If cleaning doesn’t help, you may need a new heating element (e.g., Whirlpool 279838) or thermal fuse. Our Vaughan technicians can diagnose and fix it, keeping your laundry routine on track.

Why Choose ARNI Appliance Repair in Vaughan?

At ARNI Appliance Repair, we understand how stressful appliance breakdowns can be. That’s why we offer:

• Fast, same-day service in Vaughan, including Maple, Woodbridge, and Concord.
• Certified technicians trained to fix all major brands and models.
• Transparent pricing with no hidden fees.
• Genuine parts for lasting repairs, like Bosch 00611323 pumps or LG 4681EA2001T drain motors.
• Hundreds of 5-star Google reviews from satisfied Vaughan customers who trust us to get the job done right.

Whether it’s a fridge not cooling, a dishwasher leaving dishes dirty, or a dryer that won’t heat, we’ve got you covered. Don’t let appliance issues disrupt your life. Call ARNI Appliance Repair today for expert service in Vaughan!