Most Common Samsung Range Error Codes (And What They Mean)

Why Do Samsung Ranges Show Error Codes?

Modern Samsung ranges come with digital displays that alert you when something isn’t working right. Error codes save time by pointing directly to the problem, whether it’s electrical, heating, or a sensor issue.

---

Common Samsung Range Error Codes and Fixes

C-d0 – Button Error

This code appears if a button on the control panel was pressed for too long or is stuck.
👉 What to do: Gently clean the panel and make sure no moisture is around the buttons. Turn the oven off and back on to reset.

S-01 – Safety Shut-Off

If your oven has been running at the same temperature for a long time, it may shut off for safety reasons.
👉 What to do: Switch the oven off, remove your food, and allow it to cool. Once cooled, you can restart normal cooking.

dC / dE – Divider Error

On Samsung models with dual-cook or partition features, this code means the divider isn’t in the correct position or was inserted incorrectly.
👉 What to do: Turn the oven off and reinstall the divider according to the manual. If the code stays, switch the power off for 30 seconds, then try again.

C-10 – Self-Diagnosis Code

This appears when the oven is performing a self-check. It’s not a failure unless the code shows up during normal cooking.
👉 What to do: If you only see it during a self-test, you can ignore it. If it comes up while cooking, try resetting power. If it persists, book a service call.

C-24 – Temperature Rising Too Quickly

This means the oven sensed the temperature climbing faster than normal, often due to poor ventilation.
👉 What to do: Check that vents are clear and nothing is blocking airflow. You can also try leaving the oven door slightly open to release heat.

C-F0 – Communication Error

This indicates a communication problem between the oven’s electronic components.
👉 What to do: Turn the oven off at the breaker for a few minutes, then power it back on. If the code returns, a technician may need to inspect the control boards.

💡 Pro Tip: Error codes don’t always mean a major part failure, but if they return after a reset or keep interrupting your cooking, it’s time to call a professional.

Can You Fix These Yourself?

Some codes can be cleared by turning the power off for 5 minutes and restarting. Cleaning stuck buttons or checking for a loose door latch may also help. But if the code comes back, it usually means a part needs replacement.

---

When to Call a Technician

If your Samsung range shows repeated errors, won’t heat, or shuts down mid-cycle, it’s best to have a certified technician check it. Ignoring error codes can make the problem worse.