Washer Making a Loud Noise During Spin Cycle? Here’s What It Could Be
If your washer suddenly gets very loud during the spin cycle, you’re not alone. This is one of the most common washer problems we see. The noise often starts small and gets worse over time. Many homeowners describe it as banging, grinding, roaring, or something sounding loose.
If you’re handy and curious, here are the most likely causes – and when it’s time to call a professional.
Reliable Home Appliance Repair & Installation Services
Count on ARNI Appliance Repair for repair and installation in the Greater Toronto Area. Our skilled technicians provide fast and reliable service, ensuring your appliances are up and running in no time. Schedule your service today!
Common Causes of Loud Washer Noise During Spin
1. Loose or Worn Drum Bearings
Drum bearings are located at the rear of the washer drum, especially in front-load machines. When they wear out, the washer often sounds like a loud rumble or growl during spin.
- Noise gets louder as the drum spins faster
- Often sounds like it’s coming from the back of the unit
- May start quietly and worsen over weeks or months
Some people describe bearing failure as a squeal or dry grinding sound. On models like Maytag front-load washers, this is a known issue once the machine gets older.
⚠️ Important: Bearing replacement is one of the most difficult washer repairs. It usually requires full disassembly of the tub and special tools.
2. Loose Drum or Counterweight
Washers have heavy concrete or metal weights to keep the drum balanced. If a bolt loosens or cracks:
- The washer can bang loudly during spin
- The sound may feel like something is moving or shifting
- Noise often starts halfway through the cycle
This can sometimes be fixed if caught early.
3. Damaged Shock Absorbers or Suspension
Shock absorbers help control drum movement. When they fail:
- The washer shakes hard
- Loud knocking or thumping occurs during spin
- The machine may walk across the floor
This is more common in front-load washers.
4. Objects Trapped Between Drum and Tub
Coins, screws, bra wires, or small items can get stuck.
- Noise may sound metallic
- Often comes and goes
- Can get worse at high speed
This repair is usually simpler if addressed early.
Is It Safe to Keep Using the Washer?
Short answer: not for long.
Running a washer with bearing or suspension issues can cause:
- More damage to the tub
- Motor strain
- Water leaks
- Much higher repair costs later
What starts as a repairable issue can turn into a full washer replacement.
Can a Handy Homeowner Fix This?
Some minor issues (like loose bolts or trapped objects) may be manageable.
However, drum bearing replacement is not a DIY-friendly repair for most people. It often takes several hours and mistakes can damage the tub permanently.
If the noise clearly comes from the rear and sounds deep or grinding, professional diagnosis is strongly recommended.
📞 Call us today for your washer repair service.
Most Common Causes
- Worn drum bearings
- Loose or cracked counterweights
- Failed shock absorbers or suspension springs
- Coins or debris stuck between the drum and tub
How to Tell Where the Noise Is Coming From
- Rear of washer: likely drum bearings or suspension
- Front or inside drum: loose item or damaged component
- Very loud vibration: shock absorber or balance issue
What You Should Do
- Stop using the washer if the noise is severe
- Check for loose items inside the drum
- Schedule a professional inspection if the sound continues
Important: Running a washer with loud spin noise can cause further damage and increase repair costs.
Who We Are and How We Can Help
We are a local appliance repair company serving homes across the Greater Toronto Area, including Toronto, Vaughan, Thornhill, Richmond Hill, Markham, and nearby cities.
We specialize in:
Our technicians work with all major washer brands, including front-load and top-load models.
We’re known for:
- Clear diagnosis
- Honest advice
- Strong local reviews from real customers
- Repairs done the right way
If a repair makes sense, we’ll explain why. If replacement is the smarter option, we’ll tell you that too.
Professional Appliance Repair in the GTA
If your washer suddenly became loud during spin and sounds like something is loose – don’t ignore it. Early diagnosis can save you money and prevent bigger damage.
If you’re unsure, a professional check is the safest next step.
📞 Need help? Contact your local appliance repair experts today and get clear answers before the problem gets worse.
For safe, accurate, and professional repair of all your kitchen appliances, contact ARNI Appliance Repair today at 647-808-9935.
Same-day and next-day appointments available.
Contact us today for fast, reliable service!ARNI Appliance Repair
Thornhill, Ontario
647-808-9935
info@arniservices.com
We’re proud to offer our appliance repair and installation services across the Greater Toronto Area. Whether you’re dealing with a faulty fridge in Toronto, a dishwasher in distress in Maple, or a malfunctioning microwave in Markham, our expert technicians are just a call away. We understand the urgency when it comes to appliance repairs, which is why we strive to provide prompt and reliable service to all our customers, no matter where they are located in the GTA.
FAQs
